Introduction: Old Tractor Grill Bench

Picture of Old Tractor Grill Bench

I found this old tractor grill and decided to build a bench out of it. It's my first build like this.

Step 1: I Really Didn’t Think About the Steps When I Did This, Sorry Hope You Like It Anyway.

Picture of I Really  Didn’t  Think About the Steps  When  I  Did This, Sorry Hope You Like It Anyway.

I used pallet wood to build it. For the base, I traced the grill to get the shape and cut each piece to make sure it fit.

Step 2:

Picture of

For the legs I used 2x4s. The two front were straight down but the back ones had to be cut at a 45 degree angle to allow it to sit on the ground correctly.

Step 3:

Picture of

Can't really see them but I used 2x4s on the sides of the legs to brace the front and back together.

Step 4:

Picture of

So here it is finished.

Step 5:

Comments

wold630 (author)2016-04-21

This is a great re-use project!

About This Instructable

96views

2favorites

License:

More by chriss108:Old Rolling Stand Up Cooler Into Rustic Cooler old tractor grill bench
Add instructable to: