Don't get me wrong, I wouldn't be without my cordless mini-drill. Its unbranded mains voltage cousin is handy too. Both are very essential, but I discovered that sometimes it's just quicker to reach for the hand drill, put one in the chuck and start working, no hunting for chuck keys or spanners, digging out the charger and having to wait three hours etc.
The solution: Trawl the secondhand / junk / charity / goodwill shops / garage / yard sales / boot fairs for a hand drill, aka an egg-beater drill.
When choosing your drill make sure it is complete, especially the chuck jaws and springs, if anything is missing here - move on, re-manufacturing missing parts is waaaay beyond the scope of this ibble!
Check for cracks in the castings, these things have probably hit the deck a few times in their lives.
If you haven't already done so, try and give it a turn and check to see if the spindle is out of true, again move-on if there's any hint of wobble.
Step 1: Bill of materials.
1. You will need a de-greaser of some kind to shift all the gunk from the moving parts. I'll leave the exact petroleum distillate up to you, I went for White Spirit / Stoddard Solvent. It's cheap and relatively low on acute toxicity. Always read the label of whatever you go for.
2. A general purpose light oil, the sort you put on your bike chain is perfect.
3. Boiled linseed oil. Wood needs oiling too.
Now here in the UK boiled linseed oil has been treated with hot air (boiled?) which improves the drying time. Other methods of improving the drying time include the addition of heavy metals so check your countries' regulations and read the labels, if yours states heavy metal additives go for a neat beeswax polish, alternatively, and this sounds a better proposition, Zzoe recommends using food grade walnut oil.
4. Epoxy glue, Araldite or no-name, you choose.
5. An old toothbrush. A pair of vinyl gloves. What do you mean you don't have any old toothbrushes?