Print PDF
Favorite
Email
Step 2Pepare the DPDT Switch
The DPDT switch has six connections on the bottom. Prepare it by connecting two hookup wires to the center connectors and two wires to either the left most connectors. The wires should be at least 7 cm long for now.
Check your switch with a multi meter if you have one handy.
The two center terminals (green) will be GROUND. Black is Pin 11, red is pin 3.
Check your switch with a multi meter if you have one handy.
The two center terminals (green) will be GROUND. Black is Pin 11, red is pin 3.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
