Print PDF
Favorite
Email
Step 16Mounting it and wiring it up
Once its all wired up we must attach the belt and tension it. For the CS-144 I made a tensioner from a section os 8mm all thread bolt and a jeep serpentine belt tensioner block.
On the section of all thread I butted to 8mm hex nuts together tightly to form a block. This block is put through a hold in a piece of 3/16 plate that I attached to the top of the RV2 On the other end of the all thread is screwed into the tensioner block as the nut-block is rotated the alternator is pushed back tensioning the V belt.
On the section of all thread I butted to 8mm hex nuts together tightly to form a block. This block is put through a hold in a piece of 3/16 plate that I attached to the top of the RV2 On the other end of the all thread is screwed into the tensioner block as the nut-block is rotated the alternator is pushed back tensioning the V belt.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
