This DIY is K.I.S.S

All you will need is:

2 50-60ml one way syringes (used by veterans or so)
1 infusion set

On one syringe fit on the flexible tube of the infusion set. On the second syringe do the same but cut off the overlapping part of the tube, refer to picture tag please. The second syringe needs to fit in snuggly on the reservoir tank, therefore the overlapping part of the tube has too be cut off. Oh yes remember to open the second syringe before bleeding, it is a reservoir for the mineral oil getting pumped out.

Thats it, ready to go and do some bleeding. :D

Howto bleed: https://www.google.com/search?num=50&hl=en&lr=&safe=off&as_qdr=all&q=xtr+bleeding&btnG=Search

About This Instructable




More by ZanTarG:DIY AirDryer for Aqua Ozonizors  Kangen Water: Alkaline Ionized Water Improving a Tubeless System / converting Non-Tubeless to Tubeless and stealthing out tires for the look of it. 
Add instructable to: