With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A card CD case for home or industrial production. By Zero-waste Design.Creative Commons ShareAlike-Atrribution license 2.5 applies.A template is provi...
Once you've added your own artwork, print onto A3 card, preferably 280 gsm. Here I just printed the template onto paper to demonstrate construction. S...
As per the template, glue the tabs back on themselves. These are just spacers to make space edpth-wise for the Cd when it is slid in. They also hold i...
You then have to glue the backs of the tabs that you just glued down. Turn the whole piece over and fold back the end with the tabs. They are fixed in...
Finally, glue the other end back on itself as shown. This feature adds stiffness and means that you only have to print on one side of the card.
This is where Kreyszig comes in handy. I used it as a weight and leave it on top of the constructed CD cover so the glue dries nice and tight. I would...
This is what you get. From the front, closed, it looks like the first picture. Second picture: When you open the front like a book, the back changes ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam74,488 views
86 favorites
Posted:
Sep 18, 2006
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »