Print PDF
Favorite
Email
Step 6Sticker Sheet Cutting
Just one more step before we fire up the laser.
Removing pieces from the laser can be quite a struggle if done by hand. To get past this what we do is lift everything out by using a sheet of sticker. This makes removing the pieces from the laser quick, and also gives the final product a very neat feel, as all the extra acrylic bits are also shipped.
To cut these sheets we have a specially built machine to measure out 9.5" strips. (details can be found (here) ).
A quick video of it in action (here)
Removing pieces from the laser can be quite a struggle if done by hand. To get past this what we do is lift everything out by using a sheet of sticker. This makes removing the pieces from the laser quick, and also gives the final product a very neat feel, as all the extra acrylic bits are also shipped.
To cut these sheets we have a specially built machine to measure out 9.5" strips. (details can be found (here) ).
A quick video of it in action (here)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
