Print PDF
Favorite
Email
Step 8Cutting
Finally the time has come.
Place in a sheet, close the top, and press start. What follows is ten hours of every ten minutes (60 sheets) lifting out the cut pieces, replacing with a fresh sheet and pressing go.
To help with timing we use a little program (egg timer) which plays a wav file when it runs out and allows you to do other things while the laser is at work.
(we fill all the little hardware envelopes)
Place in a sheet, close the top, and press start. What follows is ten hours of every ten minutes (60 sheets) lifting out the cut pieces, replacing with a fresh sheet and pressing go.
To help with timing we use a little program (egg timer) which plays a wav file when it runs out and allows you to do other things while the laser is at work.
(we fill all the little hardware envelopes)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
