Introduction: Open Source Green Cool Hat
We created this design in a workshop at Fab11 Boston on Design from Manufacturing. We would like to have this design open source for the following reasons:
- Open Hardware should not be limited to electronics
- Digital fabrication should be green or it won't be the motor for any kind of third revolution
- Having this Open Source could make this Robin Hood look cool again
Try it and post your photos with hashtags #green #fab11.
Let's make it green and open!
Step 1: Get Your Materials Ready!
To create this cool hat, you will need:
- Green cloth
- Color threads
- Small piece of cardboard
- (Optional) Cool open hardware sticker
Step 2: Fold Your Rectangular Piece and Cut It to Get a Square Piece
Step 3: Cut the Square in Half to Get Two Triangles
Step 5: Fold It in Half and Cut It to Get Two Triangles
Step 6: Put Five Staples on the Open Side
Step 7: Turn It Around to Staples Are in the Inside
Step 8: Get a Fold That Looks As Incredible As This One!
Step 9: Chose Your Color Thread and Locate Both Ends
Step 10: Tie the Ends So It's Firm
Step 11: Get a Small Piece of Cardboard Cut
Step 12: Put the Cardboard Inside and Attach the Thread to It
Step 13: Make Sure Cardboard Is Bent to Support It Better
Step 14: You Are Done!
Step 15: Now, Go and Take a Photo Using the Hat!
Step 16: Look Awesome and Green!
We have a be nice policy.
Please be positive and constructive.