Print PDF
Favorite
Email
Step 5Wiring
So I guess that you're really supposed to use some solder to ensure a good connection, especially for the momentary switch, but I'm not nearly that fancy. Maybe later.
Cut into the power button's lines (white/black) and tap your new button in parallel with the first. Make sure your new lines are long enough to get the cover back over top of the wall, but not so long as to bunch up or pinch when the cover is in place.
I used a spot of packing tape to keep those previously mentioned board crossing lines out of the way of catching on the switch terminals.
Cut into the power button's lines (white/black) and tap your new button in parallel with the first. Make sure your new lines are long enough to get the cover back over top of the wall, but not so long as to bunch up or pinch when the cover is in place.
I used a spot of packing tape to keep those previously mentioned board crossing lines out of the way of catching on the switch terminals.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
