Introduction: Origami Deli Hat

Picture of Origami Deli Hat

Note: When you finish the "Deli Hat." You can also do the trash can! Both have the same first 14 steps.

Step 1: Folding Process

Picture of Folding Process

Pic 1: Need your typical paper. Pic 2: Fold in half hamburger wise along dotted line. Pic 3: Fold in half the other way. Then UNFOLD. This will be your reference line. Pic 4 & 5: Grab top right corner of paper and bring the corner so that the side is flush with the middle of the paper, or the seam. Pic 6 & 7: Grab top left corner of paper and bring the corner so that the side is flush with the middle of the paper, or the seam. Pic 8 & 9: Take the top layer of the two layers and fold it up on top of the two triangles.

Step 2: Folding Process (Part 2)

Picture of Folding Process (Part 2)

Pic 10: Flip it over. Pic 11 & 12: Take the right side and fold it along the dotted line till the end is flesh with the middle crease. Pic 12 & 13: Take the left side and fold it along the dotted line till the end is flesh with the middle crease. Pic 14: Fold the bottom up over the two folds you made. Pic 15 & 16 & 17 & 18: Fold along the dotted lone and put the flap under the two layers as shown. Pic 19: Open at the bottom and done! (Note: You can even make this from a newspaper)

Any questions just make a comment!

Comments

BioSteam (author)2013-05-15

No problem! Glad your daughter enjoys the hat

anasdad (author)2013-05-15

Nicely done. My daughter loves her hat, especially after we colored it.
Thanks for posting it!
Ken

About This Instructable

1,103views

8favorites

License:

Bio: Studying Electrical Engineering at Iowa State University.
More by BioSteam:3D Origami (Hexahedron & Cube)Origami Lotus FlowerOrigami Deli Hat
Add instructable to: