Introduction: Origami Dog

By

There seem to be a lack of origami dogs, so I modified a common-ish model to make this

Step 1:

Begin with a blank piece of origami paper or squared printer paper.

(Disregard the folds; I had messed up. =_=')

Step 2:

Flip.

Step 3:

Fold one corner to the center. If you are having issues making these folds match up, fold the sides of the paper together, making an "X" in the center.

Step 4:

Fold a second corner to the center.

Step 5:

Fold the third corner to the center.

Step 6:

Flip.

Step 7:

Fold one side to the center.

Step 8:

Fold the other side to the center.

Step 9:

Squish one flap open.

Step 10:

Squish other flap open

Step 11:

Bring back flap to front.

Step 12:

Flip.

Step 13:

Fold flaps in half, this is crucial!!!

Step 14:

This is the only tricky part. Bring the side to the center

Step 15:

After the hard step, fold the flap you made behind.

Step 16:

Fold down the square (turned on a corner) flap.

Step 17:

Make the head by folding down the protrusion.

Step 18:

Fold the tail to a 90 degree angle

Step 19:

Fold the nose the same way as the tail, fold the tip backwards, and fold part of the head backwards

Step 20:

Fold the edges of the tail inward. To what point is not necessarily important.