loading
Picture of Origami Dog
There seem to be a lack of origami dogs, so I modified a common-ish model to make this
 
Remove these adsRemove these ads by Signing Up

Step 1:

Picture of
Begin with a blank piece of origami paper or squared printer paper.

(Disregard the folds; I had messed up. =_=')

Step 2:

Picture of
Flip.

Step 3:

Picture of
Fold one corner to the center. If you are having issues making these folds match up, fold the sides of the paper together, making an "X" in the center.

Step 4:

Picture of
Fold a second corner to the center.

Step 5:

Picture of
Fold the third corner to the center.

Step 6:

Picture of
Flip.

Step 7:

Picture of
Fold one side to the center.

Step 8:

Picture of
Fold the other side to the center.

Step 9:

Picture of
Squish one flap open.

Step 10:

Picture of
Squish other flap open

Step 11:

Picture of
Bring back flap to front.

Step 12:

Picture of
Flip.

Step 13:

Picture of
Fold flaps in half, this is crucial!!!

Step 14:

Picture of
This is the only tricky part. Bring the side to the center

Step 15:

Picture of
After the hard step, fold the flap you made behind.

Step 16:

Picture of
Fold down the square (turned on a corner) flap.

Step 17:

Picture of
Make the head by folding down the protrusion.

Step 18:

Picture of
Fold the tail to a 90 degree angle

Step 19:

Picture of
Fold the nose the same way as the tail, fold the tip backwards, and fold part of the head backwards

Step 20:

Picture of
Fold the edges of the tail inward. To what point is not necessarily important.