In my 4th Instructable, I'll teach you how to make an Origami Dollar Man!!!!

P.S. its in paint :(

Step 1: Materials

You Need:
-Your Hands
-$2 (or 2 dollar bill-sized pieces of paper, which I recommend)
-Tape
-Permanent Marker (optional)

And thats it!!!

Step 2: 1

Take 1 of your dollars (or dollar bill-sized pieces of paper) and fold it in half hot dog style, then unfold.

Step 3: 2

Take one side of the paper and fold it to about the middle.

Step 4: 3

Take 1 of the sides and fold to the middle, do the same with the other side.

Step 5: 4

Take the side of the Dollar that you folded down to the middle and fold it at an angle, do the same with the other side, and after, flip it over.

Step 6: 5

Take the end on the bottom and flip it up a tiny bit, and flip the dollar over again over again.

Step 7: 6

Take the corners of the part you just folded a tiny bit and bring it to the middle, same with the other side.

Step 8: 7

Now fold that to the right side but, make it so the part you folded is past it, and flip it over.

Step 9: 8

There should be 2 little flaps. You need to take those and put them on top of all of it. That should hold it together. Your done the Upper Body!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Step 10: 9

If you want to give him a tie or buttuns, do it now because it looks weird when its on tape.

Step 11: 10

Time to make the Lower Body!!!!!! Take your other Dollar and fold it in half hot dog style, then do it again.

Step 12: 11

Fold that in half hamburger style and un fold it and fold it at an angle. And now your done the Lower Body!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Step 13: Putting It Together

Now take the LB and put it under the UB. The hips should be even with the bottom of the UB. Tape it where the gray boxes are in the 3rd picture.

Step 14: Your Done!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks for reading my 4th Instructable and putting up with my Paint pictures. Please comment and rate well. If you don't get something you can comment on it and I will try to help.