Instructables

Origami Jumping Frog

Picture of Origami Jumping Frog
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
You will need one sheet of origami paper for this frog. I am using a cut piece of a4 paper (printer paper,11by81/2 inches)

Step 2:

Picture of
Fold diagonally both ways making an X

Step 3:

Picture of
Turn over and fold in half horizontally.

Step 4:

Picture of
Using the folds you just made,collapse the two sides.

Step 5:

Picture of
Fold up the bottom tip of the top layer only to the top.Do this on both sides.

Step 6:

Picture of
Fold in the sides of the triangles you just made to make a kite shape.

Step 7:

Picture of
13, 12:12 PM.jpg
Fold the inside of the kite to the outside and flip over.

Step 8:

Picture of
Fold the outside edge to the center instead of the bottom.

Step 9:

Picture of
Fold the inside to the outside.

Step 10:

Picture of
13, 12:12 PM.jpg
Flip over and fold the top point to the bottom edge.

Step 11:

Picture of
13, 12:12 PM.jpg
Flip over and fold the bottom edge to the top.

Step 12:

Picture of
13, 12:12 PM.jpg
Flip over for the last time and hold then release to make your froggy friend jump!