## Step 2:

Fold the paper in half twice to get crease lines.
Thanks for an excellent tutorial :)
<p>Thanks for these instructions. I made it (but have no picture of it). </p>
<p>I have a hard time cutting a straight line to make the hexagon. I do it and I think it is fine. But then I bring the first edge of the hexagon to the middle and I find it really crooked. Maybe I should just draw a faint line on it. But I sort of manged. I love doing this craft. Sorry, I know it is a little blurry. Also, I did it with tracing paper because I've heard that can work nicely. Thanks for putting this craft on here. It was really fun to do. :D</p>
<p>i made it!! yeay!! yes it is a very tricky origami to do. but you explained it really clearly and easy to understand. thank you very much :)</p>
Really awesome and quick way to make a hexagram. Neat project to do. :)
With regards to the hexagon bit, I just drew and cut out my own. To do this I simply drew a line then another one at 60 degrees to the first. Continue this until you have a perfect hexagon.
you rock love your art.You make it look so simple Thank you for the lovely art. <br>
Fantastic documentation!!! Your crisp fold lines are beautiful. It is obvious that you spent many hours editing your steps, using choice words for explanation. Thank you for taking the time to define. Once I conquered the 'confusing' steps, I could not figure a clearer way of stating what you have stated!
Thanks for the compliments! :) Have a Merry Merry Christmas! Here's a Christmas song for ya: http://pitchfeather.bandcamp.com/track/jolly-old-st-nicholas
Really nice... I made mine a year ago with wrapping paper - thin enough to use and a nice way to upcycle after carefully (and painfully slowly for those watching) unwrapping a birthday present - and I've come back a year later to make more...
So after some tests I try make video intruction: <br>http://www.youtube.com/watch?v=8k-xoN8L0Qc <br>it was funy
I recommend using thinner paper for this. I used a standard piece of printer paper, 8.5&quot; square and it was a bit hard to fold during the end. Origami paper is thinner, isn't it? I bet these would look really cool made from semi-transparent tracing paper.
Nice, I made some of and there are very Nice. Good and straightforward instruction
i keep getting a lopsided hexagon. any suggestions?
Make sure you are cutting it right (when you get rid of part B).<br><br>Sometimes mine is a wee bit lopsided &amp; I trim it a little to even it out. But it shouldn't be too noticeable...<br><br>Hard to help really...could be any of the steps you're getting wrong. Any step in particular that you find a little confusing or struggle with?<br><br>Just have to go over it again, make sure you read carefully and that your paper matches the pictures exactly.
Thanks! It was definitely in the cutting. You have to hit those two corners just perfectly. This turned out really nicely.
i just found a picture of a hexagon on the internet and printed it out and used it as a stencil.
Wow... I'm done... It's cute, but incredibly exhausting. I'm planning to do a dozen for next year. It's too late to start for this year... Phew!
i dont understand this at all like how do you bring the blue to the red and what do you mean by saying that you unfold the folds from step 9?<br>i dont get this at all but i think you described the rest very well this one just really confuses me
This one stumped me too! I figured it out and I will do my best to explain. When you lift the piece indicated by the blue X, it folds in half. At the same time you push the outside edge inward along the crease lines from the previous step. When you do this it enables the tip (blue x) to reach the red x edge. <br><br>I hope that helps. It's hard to describe but keep trying!
Thank you! I was so stuck!
Help!!! I have done this twice now and I just cant figure out what I'm supposed to do in step 16. Any clarification would be appreciated. Your finished snowflake is beautiful and I can tell mine could be too, I just can't get over that hurdle. Thanks in advance to anyone who can help me.
Same problem for me!! Started swearing abuse at my paper.... :/<br><br>Seriously don't understand Step 16. Got the first 2 pictures okay - but how do you 'bring it forward'??<br><br>Also, the 3rd picture looks exactly what mine looks like already...
Wait...I figured it out!! :)<br><br>Erk..how to explain...you can see the difference in the photos. Just look between the 1st &amp; 2nd photo. There are these 2 little red dots, you can see in the first picture the dots are higher up, and in the 2nd they are on the corner tips. Basically those tips you see in the 2nd photo are hidden BEHIND in the first photo. You just kinda pull the flaps forward so they're sitting on top, then put the main folds back again. It ends up looking the same as it did before now the main (big) folds have covered it up again.<br><br><br>....Does that make any sense??
This is utterly fantastic. Very clear instructions allowed this paper folding n00b to produce an amazing final product on the first try. Thanks for the great ible!
At this point my only option is squash-fold :-) <br> <br>Might have something do do with my utter ineptness at origami and the fact that I used regular copy paper, but the train wreck of a finished product actually had a certain resemblance of something beautiful. Thanks for a great instructable!
I have a friend who collects snowflakes of all kinds. I'm sure sje doesn't have this one. I'll make it for her for Christmas.<br>
Pretty! I think the origami paper I used has too much pattern, and distracts from the intricate folds. I'm going to try waxed paper next, instead.
This is glorious! You weren't kidding that this is an intricate project - but you laid it out very clearly. I will give this a shot when I have a few minutes.<br><br>Thanks for the good instructions and the fabulous photos!<br>
I'm gonna do it for my chrismas tree! like it a lot!
Congratulations, that is the clearest set of origami instructions I have ever seen and I will definitely make at least one. Do you know how to make the Jackstone origami 3-D star? I have been trying to do this for years but am never able to complete the final steps. If you could do an equally clear and detailed instructable for the Jackstone I'd love it. Even a video...
It's soo pretty!! and relatively straighforward and sounds like a beginner origami person could do that.....then agian i haven't tried this yet :D
Happy Holidays! :D
So pretty!!
That looks amazing! And what great directions!

340,699views

517favorites

Bio: I love making things.
More by Alberta Leong: