Instructables
Picture of Origami Waterbomb
This DIY will teach you how to make a inflatable paper ball. Enjoy!

Step 1: Paper

Picture of Paper
Get a piece of Origami Paper or a square piece of paper.

Step 2: Fold Part 1

Picture of Fold Part 1
13, 6:31 PM.jpg
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Turn the paper over and bring down the right edge.Crease.Do the same to the left edge. Unfold.

Step 3: Fold Part 2

Picture of Fold Part 2
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Bring the top corners down to meet the flip side. Crease. Unfold.

Step 4: Bring To Base

Picture of Bring To Base
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Bring the sides close together. Crease. It should look like a triangle.

Step 5: Start Folding Base

Picture of Start Folding Base
13, 6:31 PM.jpg
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Bring the two bottom edges up to form a rhombus. Crease. Do the same on the flip side.

Step 6: Folding Base

Picture of Folding Base
13, 6:31 PM.jpg
Bring the two side edges together. Crease. Do the same to the flip side

Step 7: Finish Folding Base

Picture of Finish Folding Base
13, 6:31 PM.jpg
13, 6:31 PM.jpg
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Bring the top two edges down to fit in the "sockets." Do the same on flip side.

Step 8: Blow

Picture of Blow
13, 6:31 PM.jpg
13, 6:31 PM.jpg
13, 6:31 PM.jpg
Look at the bottom and you'll see a tiny hole. Blow in gently.

Step 9: Done!

You can play games like keeping it up in the air- comment of games you can do!
 
Remove these adsRemove these ads by Signing Up
Cool I've made one of those before there really neat