Instructables

Origami diaper fold

Featured
Picture of Origami diaper fold
Origami and cloth diapering go hand in hand.  The Origami Fold is one of my favorites for flat diapers.

 
Remove these adsRemove these ads by Signing Up

Step 2:

Picture of
Spread your diaper on your surface/changing table.  
My diaper is much smaller than standard size.


Step 3:

Picture of
Gather together the bottom corners and lift.

Step 4:

Picture of
This will create a triangle with an extra flap.


Step 5:

Picture of
Lay the flap to one side.

Step 6:

Picture of
Fold 1/3 or 1/4 of the flap toward center (depending on the size of your diaper).

Step 7:

Picture of
Fold in again

Step 8:

Picture of

Optionally, you can fold the corners of the triangle up for a trimmer fit around the legs.







Step 9:

Picture of
Place the baby on the folded diaper.


Step 10:

Picture of

Bring the triangle's corners to the front. Here you can tie, pin, snappy or secure with an elastic belt.

Step 11:

Picture of
I like to tie. I usually knot it and the front can be pulled from under the knot if you're practicing Elimination Communication and baby needs to use the toilet.

Step 12:

Picture of
If you desire waterproofing, a cover would go on at this point.