Picture of Origami transforming star and frisbee
C:\Documents and Settings\Joe\My Documents\My Pictures\instructables, mine 002.jpg
This is a very cool star and frisbee that transforms. (This is not my work but I just want to make everybody know about it. The first pic is the star and second frisbee.
Remove these adsRemove these ads by Signing Up

Step 1: Folding

Picture of Folding
Either buy origami paper, you can get it at Michaels, or cut eight pieces of square paper, any size. I didn't have any more origami paper, so I unfolded my star, so the folds are already made. Use the video if I didn't explain good enough for you.


1. Fold the top edge of the square paper down towards you. The open ends should be facing you.

Step 2: Folding

Picture of Folding
Take the top right corner of the horizontally folded square and fold it down to the open edges.

Step 3: Folding

Unfold step 2. No picture is needed.

Step 4: Folding

Hold the paper as shown in the first picture. At the top right corner, start pushing down. You should end up with the second picture. Finish pushing and then crease. It should have two open flaps.

Step 6: Making more

Picture of Making more
Make seven more of the polygons (step 1-5.) You should end up with eight. Almost finished! Yay!

Step 7: Making the frisbee/star

Follow the pictures and picture notes. After you have connected the first two, keep joining them in the same way. The last piece is the hardest to get in, but still is easy.

Step 8: Transforming!

To transform, hold two opposite sides and pull gently. (see video).
When in frisbee form, you can throw it, but don't throw it very fast. Also be gentle with it.
rgade3 years ago
awesome !!!!
hooking the pieces is kinda confusing when theres only pictures...
Loverhood3 years ago
This is awsome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)
i don t get step 4
I dont know which way,
does it matter?
kokosmack7 years ago
LCSoccer57 years ago
Cool! I made one just now and I love it! Thanks for the instructible!