Introduction: Ornament

Picture of Ornament

A simple to make, simple to print ornament!

Step 1: Get a Shape

Picture of Get a Shape

Start by using TinkerCAD and picking out a shape you want (I chose a star)

Step 2: Flatten Shape

Picture of Flatten Shape

Flatten the shape till it is the thickness of your desired ornament

Step 3: Text

Picture of Text

Use the text generator to make the message you want,

I used one text to make "Feliz" and a second text to make "Navidad"

Step 4: Final

Picture of Final

Add a hole in the top and group everything together.

Vualah! A beautiful ornament ready to print!


seamster (author)2014-11-04

Nice ornament!

If you added the .stl file, you could enter this into the ornament contest.

RossC1 (author)seamster2014-11-06

In there now!!!

seamster (author)RossC12014-11-06

Ah, there it is! Thanks, and good luck!

RossC1 (author)seamster2014-11-04

It should be attached. Please check again and let me know

It's still not attached :(

About This Instructable




More by RossC1:Ornament
Add instructable to: