Instructables

Step 2: Oscar's Head - Part 2

Picture of Oscar's Head - Part 2
2011-09-22 00.35.42.jpg
2011-09-23 00.48.19.jpg
2011-09-24 17.20.58.jpg
2011-09-24 17.20.24.jpg
2011-09-23 01.38.37.jpg
2011-09-24 17.20.09.jpg
2011-09-24 23.49.03.jpg
2011-10-12 20.28.50.jpg
I felt it was important to make Oscar's eyes look good. I ended up using a 4" styrofoam ball. Cut it in half and reshaped with a knife and sand paper. Once I had the desired shape, I then coated the eyes with paper mache. Once dry, I painted them white and then drew in the pupils with a black sharpie.

The hardest part was trying to figure out how to make Oscar's eyebrows move. This was something I considered just not doing. But it does add that little something extra. So what I did was I took a wire coat hanger and bent it. I used 5 rubber bands that I attached to the top of Oscar's head and then looped around the hook close to my finger. So when I press down on the hook with my pointer finger the eyebrows go up and then back down due to the rubber bands. I just used some excess green fun, cut it, glued it, and then used brown spray paint, for the single eyebrow. I put a small amount of hot glue in the center of the brow to hold it.

Then I started to cut and glue the green fur to the head.

I cut the black cloth to fit the mouth and cut out a tongue shape from the red cloth and glued that to the black cloth.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!