Step 10: Attach Washers
Push the shorter 1/4 20 bolt through one of the rubber washers.
Fold the washer and insert it into the round hole on the tennis ball with the bolt sticking out.
Push the second washer onto the bolt and snug it up.
The washer and bolt assembly will be what screws into your camera.
Be careful that the part of the bolt sticking out is between a 1/4 and 3/8 inch.
That way it will not be too long for your camera mount.
Fold the washer and insert it into the round hole on the tennis ball with the bolt sticking out.
Push the second washer onto the bolt and snug it up.
The washer and bolt assembly will be what screws into your camera.
Be careful that the part of the bolt sticking out is between a 1/4 and 3/8 inch.
That way it will not be too long for your camera mount.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
