With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Your Iphone is dead, someone has run off with your Ipod wall charger, if only it where the future and all outlets were USB! This instructable wil...
Materials 2 - Mini USB chargers ($3.00 - $9.00 on eBay) 1 - Blank wall plate (screws included) 1 - Existing wall Duplex. Epoxy or other strong G...
1. Plug the Mini USB chargers into the outlets. Because the USB ports are off center I decided to put them both toward the center. I think it looke...
Not much to this step. Use a drill, Exacto knife or Dremel tool to cut out the 2 USB port holes. I prefer to use a Dremel tool, but I've cut many hol...
Use Epoxy or another type of glue to attach the USB mini Chargers to the back of the Face plate. Before the glue sets make sure your holes are lined ...
DO NOT work with live wires, and do this at your own risk. There is too much liability to explain how to wire an outlet, do this project without ...
Project Complete: Now you will never have to look for a charger again, or have to leave a computer on all night just to charge an iPod. Besides tha...
There were so many concerned people, I thought I would responses to a few of them. Comment 1. This Project isn't Green and wastes a lot of electrici...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »