Print PDF
Favorite
Email
The P90, or E90 as Echo 1 calls it, is one of the most versatile airsoft SMGs ever made. One problem with it is the low magazine capacity. You could buy a high-cap, but they are always hit- or- miss- I own 1, and my friend owns 2, Only one out of the 3 feeds correctly.
How do you cut your reloading time with a mid-cap?
A Magazine clamp.
You could spend $10 on Evike, or you could make your own...
Which will you choose? ;P
**This project is for the airsoft P90,but it would most likely work with a real-steel rifle also. This instructable is intended for airsofters.**
How do you cut your reloading time with a mid-cap?
A Magazine clamp.
You could spend $10 on Evike, or you could make your own...
Which will you choose? ;P
**This project is for the airsoft P90,but it would most likely work with a real-steel rifle also. This instructable is intended for airsofters.**
Remove these ads by
Signing UpStep 1Materials
Materials
Scrap Metal (I got mine from a dead computer... No Joke)
(2) 2.5" Screws with matching nuts.
Tools
Dremel (I used my trusty Roto- Zip)
Drill
Vice (optional)
And of course, OZZY OSBOURNE!!!
Scrap Metal (I got mine from a dead computer... No Joke)
(2) 2.5" Screws with matching nuts.
Tools
Dremel (I used my trusty Roto- Zip)
Drill
Vice (optional)
And of course, OZZY OSBOURNE!!!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
