Print PDF
Favorite
Email
Step 3Cutting and Shaping
Cut along the second line.
Do on both sides.
Shaping
Put the metal in a vice (or place on any other metal/concrete right angle) and bend it at a 90 degree angle.
Do for both sides.
To make the bend sharper, tap with a hammer along edge.
Do on both sides.
Shaping
Put the metal in a vice (or place on any other metal/concrete right angle) and bend it at a 90 degree angle.
Do for both sides.
To make the bend sharper, tap with a hammer along edge.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
