Introduction: PAPERCLIP RUBBERBAND GUN

Simple rubberband gun made out of a paperclip. i wanted to make something simple for the office supplies contest.

Step 1: Material

MATERIALS:
LONG AND STURDY PAPERCLIP
RUBBERBAND

TOOLS:
HANDS OR PLIERS

Step 2: BEND PAPERCLIP

First bend the paperclip into the shape shown in the first picture and then bend the paperclip into the shape in picture 2 and finally bend the tip as shown in the last picture.

Step 3: LOAD THE GUN

attach the rubberband as shown

Step 4: FIRE

To fire push up on the rubberband in the place shown in the picture

Step 5: WARNINGS

do not shoot at any living crearures even though you think it may not hurt. I am not liable for anything stupid you do with this. please tell me if there is anything i need to improve on it.

Comments

author
romofos made it!(author)2017-03-06

cool...

author
romofos made it!(author)2017-03-06

this is pretty cool!

author
zable95 made it!(author)2008-04-23

It's a good instructable, but you should say to use a short rubber band and a long paper clip. Like this

Picture 001.jpg
author
talzh made it!(author)2015-03-01

use a loom band with a big paper clip it goes 10-30 meters depending on the size of the paperclip

author
yapoyo made it!(author)2012-03-28

sucks you didnt even have to post the instructable(Im not a troll)

author
PotatoCoffee made it!(author)2011-12-28

Nice!

author
tabletopweopons123 made it!(author)2011-04-27

and btw like it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

author
tabletopweopons123 made it!(author)2011-04-27

can I spread on the word with my website

author
charge11595 made it!(author)2009-11-11

 Sorry, but your pics are blurry, and it is so simple , no one needs to be a member to view all steps on one page. Try using a macro setting on your camera (if it has one), and use this as ammunition for a semi-auto gun or something. This has a lot of potential; I used it on a paper airplane.

author
knexsniper1 made it!(author)2009-07-29

did this really get over 10000 views?

author
glugnar made it!(author)2009-07-29

rly bad sry

author
downsic made it!(author)2009-05-31

kids lov it. Thanks

author
kingkulko made it!(author)2009-05-19

didnt work sry

author
C+chord made it!(author)2009-04-17

It does not go far.

author
MegaMaker made it!(author)2009-03-15

Awesome, really simple- good for me :).

author
jesusfreak123 made it!(author)2008-05-05

you did the same slide at the end three X

author
asianpuff16 made it!(author)2008-04-09

dude cool tutorial!! i wanna try it!

author
mnb made it!(author)2008-02-05

i think i eed a rubber band

author
Rawns made it!(author)2008-01-08

Tried it - may have been the lacky band but it went flying for all of an inch. Next time, I will try a bigger band and a bigger paper clip...

author
zoobag made it!(author)2007-12-25

All you guys saying bad stuff about this guys neat things....where's yours? At least he's trying. It's easy to criticise. I personally think your stuff is wicked cool.
Thanks man,
Zoo ~..~

author
icedog515 made it!(author)2007-11-15

well, well, well. look who came out of the forest.

author
zeda.beta made it!(author)2007-10-29

pretty good except for the fact that it bends the paper clip if the rubber band is too strong ~zeda

About This Instructable

55,873views

12favorites

License:

More by nsaltz94:Recycled cycle lightBike Light and Turn SignalsPAPERCLIP RUBBERBAND GUN
Add instructable to: