Print PDF
Favorite
Email
Step 3Cutting
You guys done!? Hard part is over, time to get your safety gear (if you haven't already) its a must for this step!
By now you have the measurements for your binder, so its time to draw some lines in the PCB with a marker or something (i used a cd marker and later removed the ink with alcohol)
get your "dremel" tool and very carefully (and using your glasses... don't forget) cut along the lines you just drafted, BE CAREFUL.
you can use a paintbrush to clean the panels afterwards.
By now you have the measurements for your binder, so its time to draw some lines in the PCB with a marker or something (i used a cd marker and later removed the ink with alcohol)
get your "dremel" tool and very carefully (and using your glasses... don't forget) cut along the lines you just drafted, BE CAREFUL.
you can use a paintbrush to clean the panels afterwards.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
