PET Bottle Tiffany Lamp

Step 10: The body of the lamp.

Make some holes to the base of the PET bottle for the body of the lamp. One on the centre and four or five at the sides. The one on the centre must be big enough to put through the threaded pipe. Make  holes the same size on the centre of the two soda bottle caps.

Measure your bottle, use the measures for calculating the base size. I chose to make it the double of both measures.

Draw guide lines in the MDF using the measures.
With the help of a round thingy draw an ellipse. Cut the base with an utility knife and make a hole in the Centre. This should be large enough so that the threaded tube can fit in it.