With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
Hack your PEZ dispenser with your USB stick and glowing LED's for eyes. After I finished this I searched and found other PEZ USB hacks but none I coul...
Crack open the USB device to reveal it's insides. I wish I would have had a smaller device to work with because the Cruizer is a little too long. Most...
This is the difficult part. Measure how much space the USB device will use then cut that much out from the dispenser. This took me two tries and I cou...
At the end of the device is the operating LED that lights up when the device is in enabled and in use. Carefully solder the wire leads to each side of...
Drill a hole in C-3PO's head where his eyes are so that the LED's will fit nicely in place. The plastic in the head is quite thick, about 1/4 inch, so...
The only way I could get the circuit to the head was to thread the wires through the front area of the PEZ body. The wires come out at the front area ...
I superglued the LED's in place and cut, stripped, and tinned the wires for soldering. I used small cuts of shrink wrap to conceal the contacts.
PEZ USB 2.0 [C-3PO] is now complete. Just stuff all the wires up into C-3PO's head and he's now ready to use. Guaranteed to impress your friends.
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »