PIC18F Based 6 Channel DMX Transmitter

Step 7 Finished

After the paint dries, put the circuit into the enclosure. After screwing in to the panel mount DMX receptacles, I just used some crystal clear tape to assemble the rest of it. Screws or glue aren't an option in case the circuit needs to be accessed in the future.

Put on some blue decals to spice it up and put some black vinyl with room for the slide switches over the slide pots to hide the uneven holes I had cut. And put some colored tape on the slide pots till I get some knobs.

Check out more of my Instructables through my Profile  or visit my website at http://www.chromationsystems.com/  

I have many projects, including Infinity Mirrors , Full Featured DMX Wash Light Driver , Simple High Power RGB LED Driver