Introduction: PIPE MADE COFFEE MAKER

Picture of PIPE MADE COFFEE MAKER

THIS WAS A CLASS PROJECT IN WHICH, WE USED RESUABLE MATERIAL FROM THE RESTORE FROM MEDICINCE HAT.

WE MADE COFFE MAKER FROM RECYCLING MATERIAL. WE USED COPPER PIPE, FUNNEL, WOOD, SOME FITTINGS.

Step 1: STEP-1

Picture of STEP-1

FIRST OF ALL, WE COLLECT THE NEED MATERIAL FROM THE RESTORE, PLUMBING LAB AND CHEMISTRY LAB MEDICINE HAT COLLEGE.

THEN WE STARTED WORKING ON COFFE MAKER, WE CUT THE PIPE INTO DIFFERENT REQUIRED SIZES, AND THEN SAND IT WITH SAND PAPER AND PAINT THAT.

THEN WE ASSEMBLE ALL THE FITTING WITH PIPE AND MAKE A STAND TO HOLD THE FUNNEL.

Step 2: STEP-2

Picture of STEP-2

THIS IS HOW WE MADE HOLES INTO THE WOOD, IN ORDER TO FIT THE PIPE INTO WOOD.

AND WE SAND THE WHOLE WOOD TO BEFORE PAINTING IT.

Step 3: STEP-3

Picture of STEP-3

THEN WE PAINT THE WOOD, FITTINGS AND PIPES, AND ASSEMBLE THEM TO MAKE A PERFECT COFFEE STAND.

AFTER THAT WE FIT THE FUNNEL INTO THE COFFEE STAND.

Step 4: FINAL TOUCH

Picture of FINAL TOUCH

SO, WE WERE ALMOST DONE AT THIS STAGE. WE MADE A COFFEE BY THIS COFFEE MAKER.

ALSO, WE HAD SOME MORE RESOURSES, SO WE MADE ONE MORE COFFEE MAKER SAME AS FIRST ONE TO MAKE RESTORE'S MATERIAL MORE WORTH.

OVERALL COST TO MAKE THIS COFFEE MAKER WAS $20.

AND WE WOULD LIKE TO SELL THIS FOR $40.

Comments

seamster (author)2015-04-13

These look very nice!

sukhjeet (author)seamster2015-04-14

thanks

howard36 (author)2015-04-13

Very nice project

sukhjeet (author)howard362015-04-14

thanks

About This Instructable

464views

10favorites

License:

More by sukhjeet:PIPE MADE COFFEE MAKER
Add instructable to: