Instructables
Picture of POLYRO (oPen sOurce friendLY RObot)
IMAG0173.jpg
IMAG0183.jpg
IMAG0135.jpg
IMAG0132.jpg
IMAG0133.jpg
IMAG0136.jpg
IMAG0130.jpg
IMAG0069.jpg
IMAG0070.jpg
IMAG0071.jpg
IMAG0072.jpg
IMAG0073.jpg
IMAG0074.jpg
IMAG0075.jpg
IMAG0076.jpg
IMAG0077.jpg
IMAG0078.jpg
IMAG0079.jpg
IMAG0140.jpg
IMAG0141.jpg
IMAG0142.jpg
IMAG0143.jpg
IMAG0144.jpg
IMAG0145.jpg
IMAG0146.jpg
IMAG0147.jpg
IMAG0148.jpg
IMAG0149.jpg
IMAG0150.jpg
IMAG0151.jpg
IMAG0152.jpg
IMAG0153.jpg
IMAG0154.jpg
IMAG0155.jpg
IMAG0156.jpg
IMAG0157.jpg
IMAG0159.jpg
IMAG0160.jpg
IMAG0164.jpg
IMAG0165.jpg
This is an instructable on building a relatively low-cost wheeled robot platform for developing ROS applications. Think of ROS as an operating system for your robot (providing hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more). THIS ROBOT IS NOT PLUG AND PLAY. ROS runs on Ubuntu, so you should feel comfortable working with Linux.

POLYRO, short for oPen sOurce friendLY RObot (yes I know, it's a bit of a stretch), is based off of the TurtleBot platform (from the good folks at Willow Garage) and inspired a great deal by Pi Robot (developed by Patrick Goebel). I designed this platform with Human-Robot Interaction (HRI) in mind. This is the first of many future iterations, so check for updates to the design. Please keep an open mind when following this tutorial. Many of the parts and tools can be substituted (or purchased for less) and there are many improvements to be made. As always, when working with power tools use the proper safety gear.
 
Remove these adsRemove these ads by Signing Up

Step 1: Suggested Tools and Parts

Picture of Suggested Tools and Parts

Tools
  • Dremel*
  • Clamps
  • Removable Double-Sided Tape
  • Screw Driver Set
  • Needle-nose Pliers
  • Jig Saw (or maybe a Scroll Saw)
  • Saw Horses
  • Drill Press (Dremel Work Station)
  • Dremel Sanding/Grinding Kit
  • Soldering Iron
  • Sponge
  • Glue Gun
  • Large Format Printer (Kinkos)
  • Metal Ruler
  • Safety Goggles
  • Work Gloves
  • Dust Mask

Parts List

10.1-Inch Netbook
1 x $150 to $300

iRobot Create® Programmable Robot
Item Number: 4400
1 x $129.99 – www.irobot.com

Kinect for Xbox 360 with AC Adapter (Refurbished)
1 x $119.99 – www.Gamestop.com

Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS2
4 x $1.59 - www.budgetrobotics.com

Risers, Set of Four 1" Steel)
SKU/PNO:RISER-SET
4 x $1.69 - www.budgetrobotics.com

Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS1
2 x $1.59 – www.budgetrobotics.com

White Expanded PVC 24" x 48" .120" Thick
Item #: 42485
1 x $12.85 – www.usplastic.com

White Expanded PVC 24" x 48" .240" Thick
Item #: 42488
1 x $27.86 – www.usplastic.com

Gray Expanded PVC 24" x 48" .120" Thick
Item #: 42501
1 x $16.50 – www.usplastic.com

250 Grams of ShapeLock
1 x $14.95 – www.shapelock.com

Bioloid Frame F3
Item #: M-300-B-BPF-F3
3 x $1.49 – www.trossenrobotics.com

Bioloid Frame F2
Item #: M-300-B-BPF-F2
1 x $1.49 – www.trossenrobotics.com

Dynamixel AX-12A Robot Actuator
Item #: FRS-B-AX-12A
11 x $44.90 – www.trossenrobotics.com

Robotis USB2Dynamixel Adapter
Item #: FRS-B-USB2D
1 x $49.90 – www.trossenrobotics.com

SMPS2Dynamixel Adapter
Item #: FRS-B-SMPS2DYNA
1 x $4.90 – www.trossenrobotics.com

Bioloid Bolt & Nut Set
Item #: M-300-B-BPF-BNS
1 x $23.40 – www.trossenrobotics.com

Bioloid 6-Port Cable Hub
Item #: FRS-B-6-PT-C-H
1 x $4.95 – www.trossenrobotics.com

3 pin Bioloid Servo/Sensor Cables (Set of 25)
Item #: FRS-B-CBL
1 x $34.90 – www.trossenrobotics.com

Logitech QuickCam E 3560 Refurbished
SKU: 130419
2 x $10.99 – www.microcenter.com

On Stage Foam Ball-Type Mic Windscreen (Blue)
2 x $4.95 – www.amazon.com

Wall Mount Bracket Dock Stand for Kinect
SKU: 267-363-001
1 x $9.99 – www.meritline.com

USB to PDA 9-pin Serial Adapter
SKU: 173369
1 x $29.99 – www.mircocenter.com

6” Novak Heat Shrink Tubing Assortment 24 pcs
1 x $3.74 – www.amazon.com

High-Tech Rosin Core Silver-Bearing Solder (1.5 Oz.)
Model: 64-013
1 x $5.79 – www.radioshack.com

25-Position Male Solder D-Sub Connector
Model: 276-1547
1 x $2.29 – www.radioshack.com

Schmartboard 201-0001-01
1 x $5.00 – www.schmartboard.com

USB 2.0 4 Port Hub – (Black)
SKU 502880
2 x $2.99 – www.microcenter.com

0.33μF and 0.1μF capacitors
2 x each

Voltage regulator 12V 1A
2 x each

22 AWG wire (red and black)

Machine Round Head w/Nut (4-40 x 3/8)

USB extension cable

Velcro tape (optional)

White model paint (optional)

Picture of POLYRO (oPen sOurce friendLY RObot)
IMAG0173.jpg
IMAG0183.jpg
IMAG0135.jpg
IMAG0132.jpg
IMAG0133.jpg
IMAG0136.jpg
IMAG0130.jpg
IMAG0069.jpg
IMAG0070.jpg
IMAG0071.jpg
IMAG0072.jpg
IMAG0073.jpg
IMAG0074.jpg
IMAG0075.jpg
IMAG0076.jpg
IMAG0077.jpg
IMAG0078.jpg
IMAG0079.jpg
IMAG0140.jpg
IMAG0141.jpg
IMAG0142.jpg
IMAG0143.jpg
IMAG0144.jpg
IMAG0145.jpg
IMAG0146.jpg
IMAG0147.jpg
IMAG0148.jpg
IMAG0149.jpg
IMAG0150.jpg
IMAG0151.jpg
IMAG0152.jpg
IMAG0153.jpg
IMAG0154.jpg
IMAG0155.jpg
IMAG0156.jpg
IMAG0157.jpg
IMAG0159.jpg
IMAG0160.jpg
IMAG0164.jpg
IMAG0165.jpg
This is an instructable on building a relatively low-cost wheeled robot platform for developing ROS applications. Think of ROS as an operating system for your robot (providing hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more). THIS ROBOT IS NOT PLUG AND PLAY. ROS runs on Ubuntu, so you should feel comfortable working with Linux.

POLYRO, short for oPen sOurce friendLY RObot (yes I know, it's a bit of a stretch), is based off of the TurtleBot platform (from the good folks at Willow Garage) and inspired a great deal by Pi Robot (developed by Patrick Goebel). I designed this platform with Human-Robot Interaction (HRI) in mind. This is the first of many future iterations, so check for updates to the design. Please keep an open mind when following this tutorial. Many of the parts and tools can be substituted (or purchased for less) and there are many improvements to be made. As always, when working with power tools use the proper safety gear.
 
Remove these adsRemove these ads by Signing Up

Step 1: Suggested Tools and Parts

Picture of Suggested Tools and Parts

Tools
  • Dremel*
  • Clamps
  • Removable Double-Sided Tape
  • Screw Driver Set
  • Needle-nose Pliers
  • Jig Saw (or maybe a Scroll Saw)
  • Saw Horses
  • Drill Press (Dremel Work Station)
  • Dremel Sanding/Grinding Kit
  • Soldering Iron
  • Sponge
  • Glue Gun
  • Large Format Printer (Kinkos)
  • Metal Ruler
  • Safety Goggles
  • Work Gloves
  • Dust Mask

Parts List

10.1-Inch Netbook
1 x $150 to $300

iRobot Create® Programmable Robot
Item Number: 4400
1 x $129.99 – www.irobot.com

Kinect for Xbox 360 with AC Adapter (Refurbished)
1 x $119.99 – www.Gamestop.com

Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS2
4 x $1.59 - www.budgetrobotics.com

Risers, Set of Four 1" Steel)
SKU/PNO:RISER-SET
4 x $1.69 - www.budgetrobotics.com

Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS1
2 x $1.59 – www.budgetrobotics.com

White Expanded PVC 24" x 48" .120" Thick
Item #: 42485
1 x $12.85 – www.usplastic.com

White Expanded PVC 24" x 48" .240" Thick
Item #: 42488
1 x $27.86 – www.usplastic.com

Gray Expanded PVC 24" x 48" .120" Thick
Item #: 42501
1 x $16.50 – www.usplastic.com

250 Grams of ShapeLock
1 x $14.95 – www.shapelock.com

Bioloid Frame F3
Item #: M-300-B-BPF-F3
3 x $1.49 – www.trossenrobotics.com

Bioloid Frame F2
Item #: M-300-B-BPF-F2
1 x $1.49 – www.trossenrobotics.com

Dynamixel AX-12A Robot Actuator
Item #: FRS-B-AX-12A
11 x $44.90 – www.trossenrobotics.com

Robotis USB2Dynamixel Adapter
Item #: FRS-B-USB2D
1 x $49.90 – www.trossenrobotics.com

SMPS2Dynamixel Adapter
Item #: FRS-B-SMPS2DYNA
1 x $4.90 – www.trossenrobotics.com

Bioloid Bolt & Nut Set
Item #: M-300-B-BPF-BNS
1 x $23.40 – www.trossenrobotics.com

Bioloid 6-Port Cable Hub
Item #: FRS-B-6-PT-C-H
1 x $4.95 – www.trossenrobotics.com

3 pin Bioloid Servo/Sensor Cables (Set of 25)
Item #: FRS-B-CBL
1 x $34.90 – www.trossenrobotics.com

Logitech QuickCam E 3560 Refurbished
SKU: 130419
2 x $10.99 – www.microcenter.com

On Stage Foam Ball-Type Mic Windscreen (Blue)
2 x $4.95 – www.amazon.com

Wall Mount Bracket Dock Stand for Kinect
SKU: 267-363-001
1 x $9.99 – www.meritline.com

USB to PDA 9-pin Serial Adapter
SKU: 173369
1 x $29.99 – www.mircocenter.com

6” Novak Heat Shrink Tubing Assortment 24 pcs
1 x $3.74 – www.amazon.com

High-Tech Rosin Core Silver-Bearing Solder (1.5 Oz.)
Model: 64-013
1 x $5.79 – www.radioshack.com

25-Position Male Solder D-Sub Connector
Model: 276-1547
1 x $2.29 – www.radioshack.com

Schmartboard 201-0001-01
1 x $5.00 – www.schmartboard.com

USB 2.0 4 Port Hub – (Black)
SKU 502880
2 x $2.99 – www.microcenter.com

0.33μF and 0.1μF capacitors
2 x each

Voltage regulator 12V 1A
2 x each

22 AWG wire (red and black)

Machine Round Head w/Nut (4-40 x 3/8)

USB extension cable

Velcro tape (optional)

White model paint (optional)

Picture of POLYRO (oPen sOurce friendLY RObot)
IMAG0173.jpg
IMAG0183.jpg
IMAG0135.jpg
IMAG0132.jpg
IMAG0133.jpg
IMAG0136.jpg
IMAG0130.jpg
IMAG0069.jpg
IMAG0070.jpg
IMAG0071.jpg
IMAG0072.jpg
IMAG0073.jpg
IMAG0074.jpg
IMAG0075.jpg
IMAG0076.jpg
IMAG0077.jpg
IMAG0078.jpg
IMAG0079.jpg
IMAG0140.jpg
IMAG0141.jpg
IMAG0142.jpg
IMAG0143.jpg
IMAG0144.jpg
IMAG0145.jpg
IMAG0146.jpg
IMAG0147.jpg
IMAG0148.jpg
IMAG0149.jpg
IMAG0150.jpg
IMAG0151.jpg
IMAG0152.jpg
IMAG0153.jpg
IMAG0154.jpg
IMAG0155.jpg
IMAG0156.jpg
IMAG0157.jpg
IMAG0159.jpg
IMAG0160.jpg
IMAG0164.jpg
IMAG0165.jpg
This is an instructable on building a relatively low-cost wheeled robot platform for developing ROS applications. Think of ROS as an operating system for your robot (providing hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more). THIS ROBOT IS NOT PLUG AND PLAY. ROS runs on Ubuntu, so you should feel comfortable working with Linux.

POLYRO, short for oPen sOurce friendLY RObot (yes I know, it's a bit of a stretch), is based off of the TurtleBot platform (from the good folks at Willow Garage) and inspired a great deal by Pi Robot (developed by Patrick Goebel). I designed this platform with Human-Robot Interaction (HRI) in mind. This is the first of many future iterations, so check for updates to the design. Please keep an open mind when following this tutorial. Many of the parts and tools can be substituted (or purchased for less) and there are many improvements to be made. As always, when working with power tools use the proper safety gear.
 
Remove these adsRemove these ads by Signing Up

Step 1: Suggested Tools and Parts

Picture of Suggested Tools and Parts

Tools
  • Dremel*
  • Clamps
  • Removable Double-Sided Tape
  • Screw Driver Set
  • Needle-nose Pliers
  • Jig Saw (or maybe a Scroll Saw)
  • Saw Horses
  • Drill Press (Dremel Work Station)
  • Dremel Sanding/Grinding Kit
  • Soldering Iron
  • Sponge
  • Glue Gun
  • Large Format Printer (Kinkos)
  • Metal Ruler
  • Safety Goggles
  • Work Gloves
  • Dust Mask

Parts List

10.1-Inch Netbook
1 x $150 to $300

iRobot Create® Programmable Robot
Item Number: 4400
1 x $129.99 – www.irobot.com

Kinect for Xbox 360 with AC Adapter (Refurbished)
1 x $119.99 – www.Gamestop.com

Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS2
4 x $1.59 - www.budgetrobotics.com

Risers, Set of Four 1" Steel)
SKU/PNO:RISER-SET
4 x $1.69 - www.budgetrobotics.com

Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS1
2 x $1.59 – www.budgetrobotics.com

White Expanded PVC 24" x 48" .120" Thick
Item #: 42485
1 x $12.85 – www.usplastic.com

White Expanded PVC 24" x 48" .240" Thick
Item #: 42488
1 x $27.86 – www.usplastic.com

Gray Expanded PVC 24" x 48" .120" Thick
Item #: 42501
1 x $16.50 – www.usplastic.com

250 Grams of ShapeLock
1 x $14.95 – www.shapelock.com

Bioloid Frame F3
Item #: M-300-B-BPF-F3
3 x $1.49 – www.trossenrobotics.com

Bioloid Frame F2
Item #: M-300-B-BPF-F2
1 x $1.49 – www.trossenrobotics.com

Dynamixel AX-12A Robot Actuator
Item #: FRS-B-AX-12A
11 x $44.90 – www.trossenrobotics.com

Robotis USB2Dynamixel Adapter
Item #: FRS-B-USB2D
1 x $49.90 – www.trossenrobotics.com

SMPS2Dynamixel Adapter
Item #: FRS-B-SMPS2DYNA
1 x $4.90 – www.trossenrobotics.com

Bioloid Bolt & Nut Set
Item #: M-300-B-BPF-BNS
1 x $23.40 – www.trossenrobotics.com

Bioloid 6-Port Cable Hub
Item #: FRS-B-6-PT-C-H
1 x $4.95 – www.trossenrobotics.com

3 pin Bioloid Servo/Sensor Cables (Set of 25)
Item #: FRS-B-CBL
1 x $34.90 – www.trossenrobotics.com

Logitech QuickCam E 3560 Refurbished
SKU: 130419
2 x $10.99 – www.microcenter.com

On Stage Foam Ball-Type Mic Windscreen (Blue)
2 x $4.95 – www.amazon.com

Wall Mount Bracket Dock Stand for Kinect
SKU: 267-363-001
1 x $9.99 – www.meritline.com

USB to PDA 9-pin Serial Adapter
SKU: 173369
1 x $29.99 – www.mircocenter.com

6” Novak Heat Shrink Tubing Assortment 24 pcs
1 x $3.74 – www.amazon.com

High-Tech Rosin Core Silver-Bearing Solder (1.5 Oz.)
Model: 64-013
1 x $5.79 – www.radioshack.com

25-Position Male Solder D-Sub Connector
Model: 276-1547
1 x $2.29 – www.radioshack.com

Schmartboard 201-0001-01
1 x $5.00 – www.schmartboard.com

USB 2.0 4 Port Hub – (Black)
SKU 502880
2 x $2.99 – www.microcenter.com

0.33μF and 0.1μF capacitors
2 x each

Voltage regulator 12V 1A
2 x each

22 AWG wire (red and black)

Machine Round Head w/Nut (4-40 x 3/8)

USB extension cable

Velcro tape (optional)

White model paint (optional)

Picture of POLYRO (oPen sOurce friendLY RObot)
IMAG0173.jpg
IMAG0183.jpg
IMAG0135.jpg
IMAG0132.jpg
IMAG0133.jpg
IMAG0136.jpg
IMAG0130.jpg
IMAG0069.jpg
IMAG0070.jpg
IMAG0071.jpg
IMAG0072.jpg
IMAG0073.jpg
IMAG0074.jpg
IMAG0075.jpg
IMAG0076.jpg
IMAG0077.jpg
IMAG0078.jpg
IMAG0079.jpg
IMAG0140.jpg
IMAG0141.jpg
IMAG0142.jpg
IMAG0143.jpg
IMAG0144.jpg
IMAG0145.jpg
IMAG0146.jpg
IMAG0147.jpg
IMAG0148.jpg
IMAG0149.jpg
IMAG0150.jpg
IMAG0151.jpg
IMAG0152.jpg
IMAG0153.jpg
IMAG0154.jpg
IMAG0155.jpg
IMAG0156.jpg
IMAG0157.jpg
IMAG0159.jpg
IMAG0160.jpg
IMAG0164.jpg
IMAG0165.jpg
This is an instructable on building a relatively low-cost wheeled robot platform for developing ROS applications. Think of ROS as an operating system for your robot (providing hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more). THIS ROBOT IS NOT PLUG AND PLAY. ROS runs on Ubuntu, so you should feel comfortable working with Linux.

POLYRO, short for oPen sOurce friendLY RObot (yes I know, it's a bit of a stretch), is based off of the TurtleBot platform (from the good folks at Willow Garage) and inspired a great deal by Pi Robot (developed by Patrick Goebel). I designed this platform with Human-Robot Interaction (HRI) in mind. This is the first of many future iterations, so check for updates to the design. Please keep an open mind when following this tutorial. Many of the parts and tools can be substituted (or purchased for less) and there are many improvements to be made. As always, when working with power tools use the proper safety gear.
 
Remove these adsRemove these ads by Signing Up

Step 1: Suggested Tools and Parts

Picture of Suggested Tools and Parts

Tools
  • Dremel*
  • Clamps
  • Removable Double-Sided Tape
  • Screw Driver Set
  • Needle-nose Pliers
  • Jig Saw (or maybe a Scroll Saw)
  • Saw Horses
  • Drill Press (Dremel Work Station)
  • Dremel Sanding/Grinding Kit
  • Soldering Iron
  • Sponge
  • Glue Gun
  • Large Format Printer (Kinkos)
  • Metal Ruler
  • Safety Goggles
  • Work Gloves
  • Dust Mask

Parts List

10.1-Inch Netbook
1 x $150 to $300

iRobot Create® Programmable Robot
Item Number: 4400
1 x $129.99 – www.irobot.com

Kinect for Xbox 360 with AC Adapter (Refurbished)
1 x $119.99 – www.Gamestop.com

Wide 2" Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS2
4 x $1.59 - www.budgetrobotics.com

Risers, Set of Four 1" Steel)
SKU/PNO:RISER-SET
4 x $1.69 - www.budgetrobotics.com

Gusseted Plastic Angle Bracket (pack of 8)
SKU/PNO:BRAC-GUS1
2 x $1.59 – www.budgetrobotics.com

White Expanded PVC 24" x 48" .120" Thick
Item #: 42485
1 x $12.85 – www.usplastic.com

White Expanded PVC 24" x 48" .240" Thick
Item #: 42488
1 x $27.86 – www.usplastic.com

Gray Expanded PVC 24" x 48" .120" Thick
Item #: 42501
1 x $16.50 – www.usplastic.com

250 Grams of ShapeLock
1 x $14.95 – www.shapelock.com

Bioloid Frame F3
Item #: M-300-B-BPF-F3
3 x $1.49 – www.trossenrobotics.com

Bioloid Frame F2
Item #: M-300-B-BPF-F2
1 x $1.49 – www.trossenrobotics.com

Dynamixel AX-12A Robot Actuator
Item #: FRS-B-AX-12A
11 x $44.90 – www.trossenrobotics.com

Robotis USB2Dynamixel Adapter
Item #: FRS-B-USB2D
1 x $49.90 – www.trossenrobotics.com

SMPS2Dynamixel Adapter
Item #: FRS-B-SMPS2DYNA
1 x $4.90 – www.trossenrobotics.com

Bioloid Bolt & Nut Set
Item #: M-300-B-BPF-BNS
1 x $23.40 – www.trossenrobotics.com

Bioloid 6-Port Cable Hub
Item #: FRS-B-6-PT-C-H
1 x $4.95 – www.trossenrobotics.com

3 pin Bioloid Servo/Sensor Cables (Set of 25)
Item #: FRS-B-CBL
1 x $34.90 – www.trossenrobotics.com

Logitech QuickCam E 3560 Refurbished
SKU: 130419
2 x $10.99 – www.microcenter.com

On Stage Foam Ball-Type Mic Windscreen (Blue)
2 x $4.95 – www.amazon.com

Wall Mount Bracket Dock Stand for Kinect
SKU: 267-363-001
1 x $9.99 – www.meritline.com

USB to PDA 9-pin Serial Adapter
SKU: 173369
1 x $29.99 – www.mircocenter.com

6” Novak Heat Shrink Tubing Assortment 24 pcs
1 x $3.74 – www.amazon.com

High-Tech Rosin Core Silver-Bearing Solder (1.5 Oz.)
Model: 64-013
1 x $5.79 – www.radioshack.com

25-Position Male Solder D-Sub Connector
Model: 276-1547
1 x $2.29 – www.radioshack.com

Schmartboard 201-0001-01
1 x $5.00 – www.schmartboard.com

USB 2.0 4 Port Hub – (Black)
SKU 502880
2 x $2.99 – www.microcenter.com

0.33μF and 0.1μF capacitors
2 x each

Voltage regulator 12V 1A
2 x each

22 AWG wire (red and black)

Machine Round Head w/Nut (4-40 x 3/8)

USB extension cable

Velcro tape (optional)

White model paint (optional)

POLYRO (oPen sOurce friendLY RObot)
Instructables

500 Servlet Exception

java.lang.IllegalStateException: forward() not allowed after buffer has
committed.
	at com.caucho.server.webapp.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:139)
	at com.caucho.server.webapp.RequestDispatcherImpl.error(RequestDispatcherImpl.java:113)
	at com.caucho.server.webapp.ErrorPageManager.sendServletError(ErrorPageManager.java:362)
	at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:175)
	at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229)
	at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:274)
	at com.caucho.server.port.TcpConnection.run(TcpConnection.java:514)
	at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:527)
	at com.caucho.util.ThreadPool.run(ThreadPool.java:449)
	at java.lang.Thread.run(Thread.java:662)

Resin Professional 3.0.28 (built Mon, 18 May 2009 02:21:41 PDT)