POW-Rduino testing tool

Step 16 CONNECT ARDUINO TO THE "POW-Rduino"

TIME TO CONNECT "POW-Rduino" with your Arduino:
At this point all that is left is to connect your Arduino to the "POW-Rduino".  This can be done by connecting PIN-7 Arduino output to the SAFETY BINDING POST - 1 SBP-RT-1 (red top) and PIN-8 Arduino output to the SAFETY BINDING POST - 2  SBP-RT-2 (red top).  Next connect Arduino Ground from the I/O pins to SAFETY BINDING POST -GND (black top).  You are now good to go.