POW-Rduino testing tool

Step 3 Power Cord

STEP 3.1:
Start with power cord you obtained.

STEP 3.2:
Strip power cord outer covering 4" -- cut away all materials leaving only the BLACK-WHITE-GREEN wires.

STEP 3.3:
Cut individual wires as follows
Black 4"
White 3.5"
Green 3"

STEP 3.4:
Strip wire ends as follows
Black .25"
White .5"
Green .5"

STEP 3.5:
Solder wire ends

STEP 3.6:
When completed the soldered striped ends should look like picture 3.6.  Yours will be different as your ends are different.