Introduction: PRO Motorized Slider for Cheap!

Today we are going to Build a Professional Motorized Slider.

I worked on this project for over two months, so please support my work by Subscribing to my YouTube channel and on Patreon

Youtube: https://www.youtube.com/channel/UCxv6t_Fcq9exHRDejCAO0bg

Patreon: https://www.patreon.com/SuperMaker

Step 1: Watch the Video

Sorry for my english and if I make somemistake but it's my first video in english :D

SUBSCRIBE TO MY YOUTUBE CHANNEL

Step 2: WHAT DO WE NEED?

Step 3:

3D files and STLs on thingiverse:

https://www.thingiverse.com/thing:2340497

Step 4: Tips and Things That Do Not Appear in the Video P.1

the squared hole in the Aluminium.

I made this hole with my plywood Saw.
It tooks me around 1h for both the sides but it went great.

Step 5: Tips and Things That Do Not Appear in the Video P.2

Perfect fit between the printed parts and the slider.

Step 6: Tips and Things That Do Not Appear in the Video P.3

Detail of the smooth pulley on the side without any connection.

Step 7: Tips and Things That Do Not Appear in the Video P.4

the Holes in the main plate where the bolts pass through.

Step 8: Tips and Things That Do Not Appear in the Video P.5

Details of the Belt Tensioner under the main plate.

Step 9: Tips and Things That Do Not Appear in the Video P.6

The safety bolt created to avoid twisting or unwanted slippering of the accessoriess.

Step 10: Tips and Things That Do Not Appear in the Video P.7

Details of the connection Bold after removing the part to make it fit perfectly.

Step 11: Tips and Things That Do Not Appear in the Video P.8

Remember to do the same with the flywheel pivot.

It's made from a 8mm threaded rod and it screws perfectly on the flywheel.

Step 12: Tips and Things That Do Not Appear in the Video P.9

You weel need 4€ in 5 cents Coin.

They are 80 coins with a mass of 313.6 grams. Perfect to store kinetic energy.

Step 13: Tips and Things That Do Not Appear in the Video P.10

The 608zz bearing in place and the bottom of this mounting plate.

Step 14: Tips and Things That Do Not Appear in the Video P.11

The TWO mounting plate, one with the flywheel and the other with the motor.

That's all.

PLEASE SUPPORT MY WORK:

Youtube: https://www.youtube.com/channel/UCxv6t_Fcq9exHRDejCAO0bg
Patreon: https://www.patreon.com/SuperMaker

Comments

author
Yonatan24 (author)2017-05-27

What's a plywood saw? Hacksaw?

About This Instructable

1,267views

25favorites

License:

Bio: it's-a me. Maker. I'm italian. I was born in 1992 and Proud to be a maker! FOLLOW ME
More by focamonca:PRO Motorized Slider for Cheap!PRO RING LIGHT FOR CHEAPMake Any Vinyl Sticker DIY
Add instructable to: