Print PDF
Favorite
Email
Step 3Create the holes for Micro USB connecter and cables
Using the Dremel with drilling bits, sanding bits and material removing bits measure the holes and start removing material.
This step took a while as it was a bit hit or miss whether I got the holes in the right place.
Also remove material from the underside of the wood to run the cables.
This step took a while as it was a bit hit or miss whether I got the holes in the right place.
Also remove material from the underside of the wood to run the cables.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
