This is a way to turn a ho-hum bike into a cool (but maybe not so practical) ride.

Step 1: Get Your Supplies.

1. 2 2'' PVC tees

2. PVC Cement 

3. 10' X 2" PVC pipe

Step 2: Cut the PVC

Step 3: Glue the Pipe.

Step 4: Spray Paint the Pipe and Frame.

Step 5: Bolt the Front Wheel on and Install the Fork.

Step 6: Install Seat.

Step 7: Put the on Rear Tire.

Step 8: You're Done

<p>I don't have it togethert now but it is really strong, and won't break. </p>
<p>is the pvc still holding up?</p>
I don't think I could ever trust my face with a PVC (plastic) fork
<p>I know what you mean!</p>
<p>looks cool but im not sure if the pvc well hold up to that much stress </p>
<p>the pvc has done well so far.</p>

About This Instructable




More by BikeHacker:How to Make a 3D Printed Fidget Spinner Using Fusion 360  How to Make a Ring From a Nut in 30 Minutes Blinky Blockhead (beginner Arduino project) 
Add instructable to: