PVC Guitar Stand for Guitar Hero and Rock Band

by btravis72

Step 3: Assemble Base

Parts used in this step (for each side):

10 - 1 1/2" pieces
4 - 90-degree connectors
4 - end caps
6 - T-connectors
2 - 4" piece
2 - 30" pieces

Using the 1 1/2" pieces as connectors, assemble the feet for the base as shown. Keep in mind that you are making TWO halves, and each one will be a mirror image of the other (see picture 2). Use the 2 30" pieces to connect the two halves together and the base is done (see picture 3).