With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A laptop stand with cable routing for under $5 bucks. No gluing necessary. Save deskspace. Save your neck. Save your eyes. Etc.
You will need Six 5 1/2 " by 3/4" pieces Two 11" by 3/4" pieces (for a powerbook, for a dell 14 inch make these two pieces 7" to 8") Four Tee Joints...
Assemble two "shelves" like so.
Route the cables through the bends as shown. USB connectors will fit with a little nudging. If you use those nifty CAT-5 adapters, you can snake VGA...
No glue necessary! Friction should do you fine.
All done. No reason to be straight. Like MJ, this thing can do a supernatural lean. Sweet.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »