Introduction: PVC Nerf Blowgun

Picture of PVC Nerf Blowgun

BE CAREFUL!!! If you breathe in and a dart is in the blowgun you can choke. Please be careful while using this.
What will need:

1 1/2" x 36" PVC Nipple
1 3/4" 1/2" Threaded Coupling
(Optional) 1 3/4" Plug
(Optional) 1 1/2" Threaded Cap
(Optional) Any color of non-toxic paint

I made this for about $6.00 from Lowe's. Prices may vary.

Step 1: Step 1

Picture of Step 1

If you are going to paint the blowgun paint it before you put it together. To put the blowgun together you want to put the coupling on one end of the pipe. Now put a Nerf dart in and enjoy. And please be careful.

Step 2: (Optional)

Picture of (Optional)

The plug and the threaded cap are to keep dust out of the blowgun. They are also to keep darts in the the blowgun when you store it.


JohnW51 (author)2017-11-07

Nice, but how did you get the threads on the PVC pipe? Seem like you could just use regular non-threaded PVC couplings.

About This Instructable




More by Donnied6905:How to Build a House.PVC Nerf BlowgunHow To Build A 5 Story Building On Minecraft
Add instructable to: