Introduction: PVC Surfboard Shaping Rack / Ding Repair Stand

Picture of PVC Surfboard Shaping Rack / Ding Repair Stand

This a very basic DIY PVC surfboard shaping rack or repair stand. Since pictures are worth 1,000 words I will keep text to a minimum.
Total cost of this project - $30 (including the hacksaw I purchased )

Step 1: Materials

Picture of Materials

Step 2: Threaded Connections for Easy Assembly and Disassembly

Picture of Threaded Connections for Easy Assembly and Disassembly

The dimensions of the U shaped piece are, starting from the top left, 4"x8"x8"x8"x4"

Step 3: Put It Together

Picture of Put It Together

I am 6'3 so I made the total height of this stand 40". You want it to be a comfortable height that is specific to you.

Step 4: The Finished Product

Picture of The Finished Product

I used .5" foam to cover the PVC and masking tape.
The shaft that is coming out of the concrete and 5 gallon bucket is 2" PVC

The U shape top part is made out of 1.5" PVC.

This stand/rack can be taken apart into three pieces for easy storage and transportation.

If you have any questions, leave a comment and I will try to answer you the best I can.

Comments

kaboom949 (author)2014-01-19

Brilliant. I'm actually looking for a cheap paddleboard rack for my garage. I think I just found it. Thanks for the Instructable.

About This Instructable

5,471views

22favorites

License:

More by hgoose:How To Properly Vent Out A Dryer ExhaustPVC Surfboard Shaping Rack / Ding Repair Stand
Add instructable to: