Introduction: PVC Wizard Spud Gun

Picture of PVC Wizard Spud Gun

ATTENTION! I will not be held responsible for any damage done while or after making this spud gun.

Step 1: Make

Picture of Make

Get Materials in picture above in wanted thickness

Whenever you make a connection, glue it!

Step 2: Make

Picture of Make

Cut smaller of two pipes-cut 4" of pipe

Step 3: Make

Picture of Make

Glue Connector onto larger of two pipes

Step 4: Make

Picture of Make

Attach the 4" small pipe to the larger pipe connector

Step 5: Make

Picture of Make

Connect valve to smaller 4" pipe

Step 6: Make

Picture of Make

Connect end cap to thinner pvc pipe

After- See picture

Step 7: Make

Picture of Make

Before gluing the final pieces on, drill one hole in the smaller of the two pipes

Poke the schrader valve into the hole and glue it in place

Step 8: Make

Picture of Make

Glue Pipe in place in the valve

Step 9: Make

Picture of Make

Let dry over night-HAVE FUN!


BMXfreestyler112_ (author)2017-10-16

dude i love this i have made one almost exacly like this but i dont have pvc glue so imma use hair spray instead

seamster (author)2015-01-29

Looks pretty good! Thanks for sharing your spud gun.

Welcome to the site! I hope we see lots of great pvc projects from you. :)

About This Instructable




More by PVC Addict:PVC Wizard Spud Gun
Add instructable to: