Print PDF
Favorite
Email
Step 10Fill the Tubes with Sand
Once the caulk dries, unscrew the speaker platform and begin filling the tubes with your sand.
Once you've filled the tube all the way, screw the top back on and lightly knock the stand against the ground. Just pick the entire thing off the ground an inch or so and let it drop. This helps the sand settle in the tube so you can add more.
TIP: Do this step close to where you intend to use these...they are a bit heavy after this.
Once you've filled the tube all the way, screw the top back on and lightly knock the stand against the ground. Just pick the entire thing off the ground an inch or so and let it drop. This helps the sand settle in the tube so you can add more.
TIP: Do this step close to where you intend to use these...they are a bit heavy after this.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
