Print PDF
Favorite
Email
Step 4Cut the All-Thread
To find out how long you need the all-thread to be, the easiest thing to do is put the all-thread into the pipe, and leave ~3/4" hanging out on either side. Then just mark it off and cut it with the hacksaw.
After you cut the All-thread, do a test fit with you 3/8" nut to make sure that nothing is wrong with the thread where you cut it.
After you cut the All-thread, do a test fit with you 3/8" nut to make sure that nothing is wrong with the thread where you cut it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
