Print PDF
Favorite
Email
Step 4Bondo!
In case you do have some dents you'd like to make go away, it's nice and easy. Ask yourself: is this dent really big, like over an inch deep and 6 inches wide? If so, get a dent puller or something ( not my area of expertise ).
For small dents, sand 2 inches all around the dent down to bare metal (use really rough sandpaper, maybe 120 grit). Make sure the metal part is really rough. Then get a can of Bondo - you can find it everywhere - and mix it up on a clean, non-porous surface. Slap it on the dent, cover the whole area past flush.
Try not to get bubbles mixed in, these look terrible. Then you sand the Bondo back down to flush, using really big sanding strokes to make it even with the whole surface. Use progressively finer sand paper to get a nice smooth end product. You shouldn't be able to feel where the Bondo blends into the car.
For small dents, sand 2 inches all around the dent down to bare metal (use really rough sandpaper, maybe 120 grit). Make sure the metal part is really rough. Then get a can of Bondo - you can find it everywhere - and mix it up on a clean, non-porous surface. Slap it on the dent, cover the whole area past flush.
Try not to get bubbles mixed in, these look terrible. Then you sand the Bondo back down to flush, using really big sanding strokes to make it even with the whole surface. Use progressively finer sand paper to get a nice smooth end product. You shouldn't be able to feel where the Bondo blends into the car.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 14, 2010. 6:20 AMwonkette
says:
You may also want to: use Rage Gold, which is a premium, albeit expensive (#35 - $60 per gallon) body filler. It doesn't make as many pinholes as does Bondo. Or make sure the Bondo is "fresh".
Reply
 |
Add Comment
|
