Paintball Grenades

Step 9 The safety pin

This should have been made befor putting the paint in the grenade but i can figure out how to insert steps. Using plyers make a safety pin out of coat hanger. To brake the coat hanger just bend it back and forth several times fast and it'll break. If you want you can also add a ring to the pin. Once the the grenade is filled and you've put the BB in, keep it sealed and push the safety pin through the hole you made above the collar. After this you should be able to un twist the neck and your finnished.

Comments

[tommyskater1]

what kind of tubing do you use?

[switchpaw]

between 20 and 16 gauge wire works for the pins.

[Prop]

Surgical Tubing....Sorry it took so long to respond, for some reason I didn't get a notification.

[switchpaw]

or latex tubing as it is known in hardware stores.

[dynamite boy]

you use sergical tubeing