Print PDF
Favorite
Email
Step 3First Wire Bends
Find the midpoint of each of the wires by balance or measure.
Bend the wires at that point back onto themselves flat.
A vice is handy to make the final crimping as shown. Or use pliers.
Carefully straighten and flatten the wire again when done.
It's also a good time to grind, file and polish the crimped end contact point, so it will rotate well on the battery + terminal.
Bend the wires at that point back onto themselves flat.
A vice is handy to make the final crimping as shown. Or use pliers.
Carefully straighten and flatten the wire again when done.
It's also a good time to grind, file and polish the crimped end contact point, so it will rotate well on the battery + terminal.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
