With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a simple pallet bench project I wanted to share with everyone. I was making this for a family night we will be hosting. Though it is a bit cru...
You will need a few tools to get the job done. Drill, drill bit and phllips bit, hand saw (or power saw), 2-1/2 & 3 inch screws, tapemeasure, pencil, ...
The pallet I am using is 44 x 32 inches. I cut a small portion of the pallet to use for the back rest. With drill/screw gun drive 3, 3 inch screws anc...
I also found small scrap 2x1 inch wood for side supports. To be honest I held them into place and marked the future pilot holes as well as marked the ...
Once the supports are in place I decided to give it a once over with a sander to clean up some of the rough edges before adding the legs.
I wanted my bench to be 16" from the ground. I measured and cut each 2x4 at 16" then attached them to the sides both on the front and back for support...
When complete this should be a SOLID bench seat for your home. You can also add stain and a pad for more comfort. Feel free to contact me with any que...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »