With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This is a simple pallet bench project I wanted to share with everyone. I was making this for a family night we will be hosting. Though it is ...
You will need a few tools to get the job done. Drill, drill bit and phllips bit, hand saw (or power saw), 2-1/2 & 3 inch screws, tapemeasure, ...
The pallet I am using is 44 x 32 inches. I cut a small portion of the pallet to use for the back rest. With drill/screw gun drive 3, 3 inch ...
I also found small scrap 2x1 inch wood for side supports. To be honest I held them into place and marked the future pilot holes as well as ...
Once the supports are in place I decided to give it a once over with a sander to clean up some of the rough edges before adding the ...
I wanted my bench to be 16" from the ground. I measured and cut each 2x4 at 16" then attached them to the sides both on the front ...
When complete this should be a SOLID bench seat for your home. You can also add stain and a pad for more comfort. Feel free to contact me with any ...
Upcycled outdoor furniture setby craterobber
Pallet Benchesby Technohippy
Pallet Cleaningby ddickson3
Outdoor Pallet Gardenby veryrealperson
Recycle Pallet Benchby eyethforce
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »