Pallet desk

Step 3 Assembly

Cut the floor boards (5) to fit the pallet board (2) length
Adjust the plywood boards (1)  to get an overall surface equal to pallet board (2) x cross-board (4) 

Now you have every parts at the right size, let's build up the desk!

- nail the plywood (1) into the 3 bottom boards (2)
- screw the pallet blocks (3) through the bottom boards (2)
- screw the pallet block (3) through the cross-boards(4)
- screw the floor board (5) into the cross-boards (4)
- screw the leg (6) into the bottom boards (2)